How to prepare wood before painting: the primer that speeds up work on site
A guide for professional applicators on how to cut preparation time without compromising the result
Category: Application Tips
Reading time: 4 min
On a job site, time is the variable that matters more than any other. Every hour spent on a preparation phase can be an hour taken away from the next job. And yet wood preparation remains a phase that cannot be skipped — the right question is not "can I avoid it", but "can I make it faster without losing quality".
The role of the primer in wood preparation
An impregnating-filling primer has a precise function: to even out the absorbency of the wood, fill the micro-pores of the surface and create a base that accepts subsequent finishing products better and more evenly. Without this phase, the final finish risks being absorbed irregularly, with uneven aesthetic results and a shorter lifespan.
Turapori Nitro (62.630) is designed exactly for this, with an important practical advantage for those working on site: rapid drying and easy sanding, which allow much faster work cycles compared with a traditional primer. It is also compatible with all the finishing products in the wood range, including polyurethanes.
How to use it in practice
The product is applied diluted 50% with Nitro thinner. Drying is fast — one hour dust-free, six hours through — which means that, in many site conditions, it is possible to apply the primer in the morning and proceed with light sanding and finishing on the same working day. Recoating is possible after a minimum of six hours.
The correct steps
- Check that the wood is clean and free of machining dust.
- Apply Turapori Nitro diluted 50% with Nitro thinner, evenly.
- Leave to dry for at least one hour until dust-free.
- Carry out a light sanding for adhesion.
- Proceed with the chosen finishing product, observing the minimum recoating time of six hours.
A mistake that costs time rather than saving it
Why it pays to explain this to clients
In summary
Wood preparation can be made much faster with the right product. Turapori Nitro (62.630) combines rapid drying and easy sanding, allowing work cycles that adapt to the real pace of the job site, without compromising the quality of the final result.
Recommended products
Related articles
varnishes and finishesSatin or gloss varnish for wood: which finish to choose for your projectWood Products4 minTwo clear finishes, two different results: how to choose based on the setting and the effect you want to achieveREAD
varnishes and finishesWood by the sea: protecting terraces, furniture and boats from salt airIdeas with Wood – Outdoors4 minThe marine climate is among the most aggressive for wood: here is how to tackle it with the right productREAD
preparationGreyed or stained wood: how to restore its natural colour without sandingApplication Tips4 minThe quick solution for garden furniture, terraces and outdoor surfaces worn by timeREAD
preparationVarnishing wood: the complete guide for absolute beginnersApplication Tips4 minAll the basic steps for those who have never treated wood before, explained simplyREAD